Automation systems and components
POSYC 3000
Industrial PC for Scada System
Flush mounting industrial PC for SCADA system; it can be mounted both on vertical panels and on movable bases, working as an operator panel or as a control system..
- 15" LCD TFT display with built-in Touch Screen
- operating systems MS DOS, MS Windows e Linux
- 10/100 Ethernet port, USB, RS232C/optical, RS422, RS485
- double internal PCI expansion slots
- customizable front bezel
Technical data - POSYC3000
| Architecture | x86 |
| Structure | steel |
| Mounting | flush |
| Processor | Intel Celeron M ULV 600MHz |
| System memory | DDR 512MB 266MHz (up to 1GB optional) |
| Mass storage | 1 x compact flash 1GB + 1 x 2GB 2 million R/W cycles (different size optional) |
| I/O interfaces | 1 x serial RS232 electrical or optical mode |
| 1 x not insulated serial RS232/422/485 | |
| 1 x serial RS232 | |
| 1 x PS/2 keyboard + 1 x PS/2 mouse | |
| 2 x USB 2.0 + 1 x IP65 front mounted USB 2.0 | |
| 1 x 10/100Mbps ethernet | |
| 2 x 2kV insulated RS485 | |
| 1 x 56kbps PSTN modem | |
| 1 x Profibus DP master (optional) | |
| Display | 15,0 LCD TFT panel, 300cd |
| 1024 x 768 resolution (XGA) | |
| Touch screen | 5 wire resistive - high definition |
| high resistance - 35 million of touches per point | |
| External display connection | 1 x female 15 pin connector |
| Expansions | 2 x half size PCI slot |
| Compatible operating systems | MS DOS |
| MS Windows | |
| Linux Suse | |
| Environmental characteristics | operative temperature from 0ºC to 50ºC |
| operative relative humidity (non-condensing) from 0 % to 90% | |
| storage temperature from -20ºC to 60ºC | |
| Electrical characteristics | power supply 24 Vdc |
| power consumption 43 W max |
SMITec (division of SMI S.p.A.) cannot be held responsible for any writing or printing error of this brochure. SMI S.p.A. also reserves the right to change the above mentioned information without any notice. All the registered trademarks belong to their owner.
